01 Oct Racing at walking pace

Source: Fujifilm X Blog

As well as shooting trackside and pitlane action, FIA World Endurance Championship (WEC) and European Le Mans Series (ELMS) official photo agency Adrenal Media are always looking to provide some very special images from each of the events.

Creative Director and Fujifilm X-Photographer John Rourke invited German race team Proton Competition to bring both of their Porsche 911 RSR 991 race cars to La Source at the recent ELMS weekend at Spa-Francorchamps in Belgium to photograph their car using a rig and a Fujifilm X-T2 to capture a shot of the two race cars from an unique vantage point.

The set up

The rig is a 6 metre carbon fibre four section boom made by UK firm Car Camera Rig that is fixed to the car using high powered suction clamps.

The camera, which is a FUJIFILM X-T2 fitted with the XF10-24mm ultra-wide angle zoom lens, is then fixed in position to the end of the boom. To achieve the correct exposure the camera is fitted with a Formatt Hitech filter system, in this case a Polariser and an ND Grad and then an ND filter to extend the shutter speed to around 10 seconds. This allows Adrenal Media to take images from a position that would not be possible to take when the cars are on track racing.

X-T2 on the end of the boom

Using a long shutter speed of between 8 to 10 seconds the movement in the shot is achieved at walking pace by team members pushing the cars and the result is an image that makes it look like both Porsches are moving at racing speed.

Shoot in progress

“We started asking teams to provide us their cars back in May for these special images but this shot with Proton Competition is the first we’ve done with two cars from the same team,” said John Rourke.  “The reason we use the rig is to take images of the cars from a vantage point that would be impossible to do in the real world.”

The shoot continues

“Each shot takes around 20-30 minutes to complete once the rig is attached to the car,” John continued. “The rig itself is lightweight thanks to the carbon fibre construction so it doesn’t take long to put in position, the biggest issue we have is finding a place to attach the suction clamps to the bodywork of the car.  Some cars are wrapped, so the suction clamps don’t have a perfect seal, so we usually do a pre-shoot recce with the team to ensure there are mounting points where the rig can be securely attached to the bodywork of the car.”

“The X-T2 is the perfect camera for this type of shot. The 24mp X-Trans III sensor gives us high resolution images to work with and the tilt screen is a real help when the camera is attached upside down to the end of the boom.”

Racing at walking pace posted on Fujifilm X Blog on .

Read the full article on Fujifilm X Blog
Home