11 Oct “FUJINON HF50XA-5M” — introducing a telephoto-type of machine vision lens for inspections and measurements at production lines
Introducing a telephoto-type of machine vision lens for inspections and measurements at production lines
Compatible with a 2/3-inch sensor・3.45μm pixel pitch / MOD of 200mm with compact design
anti-vibration and shock-resistant performance to deliver a high resolution under diverse installation conditions
October 11, 2017
FUJIFILM Corporation (President: Kenji Sukeno) has announced the release of the new “FUJINON HF50XA-5M” (“HF50XA-5M”), a machine vision lens which is used for product inspections and measurements at production lines. “HF50XA-5M”, which is scheduled for release in mid-December 2017, has the focal length of 50mm, and is compatible with a 2/3-inch sensor・3.45 µm pixel pitch* (equivalent to 5 megapixels).
Despite being a telephoto lens, the “HF50XA-5M” achieves the MOD of 200mm to enable close-up shooting with a compact body measuring φ33mm in external diameter. In addition, the “HF50XA-5M” is equipped with anti-vibration and shock-resistant performance, which allows the lens to be used under a variety of conditions, such as installation site subject to large vibrations.
In recent years, there has been a growing demand for greater production efficiency and stricter quality control, and more manufacturing sites adopt a machine vision system for product inspections and measurements. In this trend, manufacturers are exploring ways of performing inspections of greater accuracy in a diverse range of installation conditions. As a result, high resolution performance and compact design are required in lenses which are the input device for imaging information.
In February 2017, Fujifilm launched the “FUJINON HF-XA-5M series” (“HF-XA-5M series”) of machine vision lenses, which is
Read the full article on FujiFilm.comHome