13 May Fuji X-T2 – Firmware 4.0 Focus Stacking Example (Landscape)

Source: Mostly Photos

I updated the firmware on the X-T2 to Firmware 4.0 which includes the addition of a focus stacking function. The Manual is a little obscure on how to use this feature but a bit of trial and error results in good results.

I set up with the Fuji X-T2 and 10-24mm @ f8 – I focused on a foreground subject at about 1 foot from from the camera and focused on this.

Fuji X-T2 and Fuji 10-24mm @f8
Focus Stacking Example with Firmware 4.0

I set the Focus Stacking settings to 99 frames and 3 steps with a 0s interval. The camera took 5 frames to step from the focus on the foreground to infinity. I blended the 5 frames in Photoshop using Auto Blend Layers.

Fuji X-T2 Focus Stacked Landscape Example

Fuji X-T2 and Fuji 10-24mm @f8
Focus Stacking Example with Firmware 4.0 – Click on Image for Larger Version

I have taken a 100% crop of the wooden shed in the background of the image. This shed is appx. 60 feet from the foreground subject and in the un-blended shot (on the right) the focus is very soft due to focus point being 1 foot in front of the camera. It would be possible to get a better spread of focus with hyperfocal distance techniques but not the level of sharpness that can be achieved with a blend.

100% crop example of X-T2 Focus Stacking with Firmware 4.0

Fuji X-T2 and Fuji 10-24mm @f8
Focus Stacking Example with Firmware 4.0 – 100% crop

Fuji X-T2 - Firmware 4.0 Focus Stacking Example (Landscape) posted on Mostly Photos on .

Read the full article on Mostly Photos
Home